How to reset YinZhiBoo xdc600 eBike to factory Settings?

If your XDC600 electric bike display is showing error data, experiencing configuration issues, or you simply want to return it to its original factory state, performing a factory reset is often the quickest solution.

Why Reset the XDC600 electric bike Settings?

A factory reset can help solve various problems, including:

Display parameter misconfiguration

Incorrect distance readings

Incorrect speed readings
Wrong wheel size settings
Speed limit configuration errors

Restoring factory settings returns the display parameters to their default values, allowing you to start with a clean configuration.

How to Perform an XDC600 eBike Factory Reset

If you need to restore the XDC600 settings to its factory default settings, follow the steps below carefully.

Step 1: Enter the Main Settings Interface

Turn on the display and enter the main settings menu.

Make sure the current speed is 0 km/h (0 mph) before proceeding.

Step 2: Access the Factory Reset Menu

Press and hold the Power Button and "+" Button simultaneously for approximately 2 seconds.

The display will enter the factory reset interface and show:

dEF

Step 3: Select Factory Reset

The display provides two options:

dEF-N = Do Not Restore Factory Settings
dEF-Y = Restore Factory Settings

Use the "+" or "-" button to switch between the two options.

Select:

dEF-Y

to continue.

Step 4: Confirm the Reset

Press the "i" (Information/Menu) button to confirm.

The display will briefly show:

dEF-0

for several seconds.

Step 5: Wait for the Restoration Process

The XDC600 will automatically restore all factory default parameters.

Once the process is completed, the display will automatically return to the settings interface.

No additional action is required.

Factory Reset Interface Indicators

Display Message	Meaning
dEF-N	Cancel factory reset
dEF-Y	Confirm factory reset
dEF-0	Reset process in progress

Important Notes

Before performing a factory reset:

Record any customized settings.
Note your wheel diameter configuration.
Save your preferred speed limit settings.
Verify battery voltage settings after restoration.

A factory reset will return all parameters to their original factory values, including wheel size, speed limit, PAS settings, and display preferences.

XDC600 Default Factory Settings

The following values are the factory defaults for the XDC600 display:

Parameter	Description	Default Value
P01	Backlight Brightness	03
P02	KM / Miles Selection	01
P03	Battery Voltage	48V
P04	Sleep Time	10 Minutes
P05	PAS Levels	1–5
P06	Wheel Diameter	26
P07	Number of Sensors	6
P08	Speed Limit	32
P09	Start-up Mode	01
P10	Drive Mode Setting	02

These values represent the standard factory configuration and may vary slightly depending on the e-bike manufacturer.

What Happens After a Factory Reset?

After resetting the XDC600 display:

Customized settings will be removed.
Speed limits return to default values.
Wheel diameter settings may need adjustment.
PAS configuration returns to factory settings.
Backlight and display preferences are restored.

If your electric bike uses a non-standard wheel size or controller setup, review all settings before riding.

Troubleshooting After Reset

Speed Reading Is Incorrect

Check parameter P06 and ensure the wheel diameter matches your bicycle.

Battery Level Appears Wrong

Verify that P03 matches your battery system voltage.

Speed Limit Feels Too Low

Review P08 and confirm the correct speed limit setting for your region and local regulations.

Pedal Assist Feels Different

Check P05 and P10, as these settings affect assist levels and drive modes.

Frequently Asked Questions

Will a factory reset fix display errors?

In many cases, yes. Configuration-related issues are often resolved by restoring factory settings.

Does a factory reset delete all settings?

Yes. A factory reset restores the XDC600 display to its original default parameters.

Is factory reset safe?

Yes, provided you understand that all customized settings will be lost and may need to be configured again.

Do I need to reset the controller too?

Not usually. The XDC600 display reset only affects display parameters unless otherwise specified by the e-bike manufacturer.

Final Thoughts

The XDC600 electric bike factory reset function is a useful troubleshooting tool for resolving configuration problems and restoring normal operation. After resetting, verify all important parameters such as battery voltage, wheel diameter, speed limit, and PAS settings before riding your electric bike.

By understanding the default settings and proper configuration process, you can keep your XDC600 electric bike display operating accurately and reliably.